Certified ATEX coveralls: antistatic, multi-risk, high visibility
You are in the right place to equip your teams working in explosive atmosphere zones. Every ATEX coverall from the Cepovett Safety brand is certified EN 1149-5, a non-negotiable requirement for this type of environment. This page helps you identify the model suited to your workstation and risk level. Browse the collections below or ask an expert for advice to validate your choice.
An ATEX coverall compliant with the standards required for your hazardous zones
Every coverall in the Cepovett Safety collection is certified EN 1149-5, which guarantees the dissipation of electrostatic charges. This is the essential baseline for any intervention in an ATEX zone. The actual risk then depends on your workstation: a refinery operator and an occasional maintenance technician do not have the same requirements.
Additional standards are combined depending on the hazards present: EN ISO 11612 for heat and flames, EN ISO 11611 for welding, IEC 61482-2 for electric arc, EN 13034 for liquid chemical risk. Correctly identifying these standards avoids costly over-protection or, more seriously, dangerous under-protection. All our coveralls are delivered with their technical datasheet and certificates of conformity, available for review before purchase.
Identifying your workstation risk level before choosing
First distinguish between the electrostatic risk alone, covered by EN 1149-5, and combined risks (chemical, thermal, electric arc). A petrochemical operator, a grain silo maintenance agent, a gas network technician or an industrial spray painter in a booth do not face the same hazards. To validate the exact standard required, refer to our Compliant with EN 1149-5 and seek advisor guidance in the event of multiple risks.
What EN 1149-5 certification guarantees on each model
EN 1149-5 certification ensures the dissipation of electrical charges and presupposes use with an earthing system. On every reference, Cepovett Safety quality control and certificate traceability eliminate any regulatory doubt. Depending on the model, coveralls meet the requirements of PPE category II or III. In the event of combined risks or uncertainty over the standard, contact a technical advisor before confirming your choice.
Which ATEX coverall to choose based on your trade and comfort
Our collection covers several coverall families to suit every workstation. Standard multi-risk coveralls are suited to indoor interventions or already visually secured zones. ATEX high-visibility coveralls, compliant with EN ISO 20471, are required for outdoor workstations or where machinery is in circulation. Finally, the choice of fabric weight arbitrates between thermal comfort and durability.
- Lightweight coverall (fabric around 260 g/m²): limits thermal fatigue in summer or hot environments.
- Reinforced coverall (fabric around 320 g/m²): provides security for prolonged and repeated exposures.
- Single or double zip fastening and knee pockets depending on working posture.
- Non-magnetic hardware as standard, a specific requirement for ATEX zones.
All standard sizes are available, from 0 to 7 (approximately XS to 4XL), with a size guide to secure your order. For separate-piece equipment, also consult our ATEX pants collection to pair with a suitable ATEX multi-hazard jacket.
Standard or high-visibility ATEX coverall: which to choose
The standard version is sufficient for indoor workstations or visually secured zones. The high-visibility version becomes mandatory wherever there is moving machinery, outdoor work or low lighting, with EN ISO 20471 in addition to EN 1149-5. The benefit is immediate: a clear reduction in collision risk on industrial or logistics sites. Our Certified high-visibility coveralls are suited to these environments.
Lightweight or reinforced coverall depending on exposure duration
A fabric around 260 g/m² offers appreciable thermal comfort for regular use or warm climates. A fabric around 320 g/m² prioritises durability and enhanced protection for prolonged exposure or intensive use. If in doubt over which fabric weight to choose, seek advice from a Cepovett Safety expert rather than making a default selection.
Tip : For a workstation alternating between indoor and outdoor, a high-visibility model in an intermediate fabric weight covers both situations without multiplying outfits — a real gain for managing your garment fleet.
ATEX coveralls designed to last and for your everyday comfort
Comfort determines teams' willingness to wear their PPE. Our coveralls incorporate an elasticated waistband, action gussets at the elbows, knees and back, and an ergonomic cut. The many functional pockets (rule pocket, chest pocket, thigh pocket) are designed for field use without compromising safety.
Industrial laundering resistance in accordance with EN ISO 15797 (washing up to 75 °C) is a key argument for companies managing their garment fleet through industrial laundries. The fabric and non-magnetic hardware guarantee long-lasting performance, even under intensive use. This level of requirement draws on Cepovett Safety's French expertise and quality control applied to every collection.
To complete your teams' outfits, consider complementary garments worn under the coverall or as an outer layer. Our ATEX-certified T-shirts and polo shirts for multiple hazards ensure continuity of protection while maintaining thermal comfort at demanding workstations. Browse the collection and compare fabric weights according to the intended use.
Good to know : Every reference comes with its technical datasheet and certificates of conformity, available for review before purchase. You can thus validate the compliance of your equipment in complete transparency.
Ordering your ATEX coveralls with complete confidence
For HSE managers and purchasing departments, logistics matter as much as compliance. We guarantee fast delivery across France, with lead times clearly stated according to stock availability. For equipping complete teams, a tailored quote and tiered pricing are available, with a dedicated contact for multi-size orders.
In the event of a sizing error, our streamlined return and exchange policy draws on the size guide to secure your future orders. Customisation by company marking is available on volume orders, an asset for your teams' identity. Our Customized 360-degree solutions for large enterprises supports every equipment project from model validation through to delivery.
Still unsure about a model's compliance with your workstation? A Cepovett Safety technical advisor validates your choice before you order. Request your group quote and secure the equipment of your ATEX zone teams, with guaranteed EN 1149-5 certification and controlled manufacturing quality on every reference. Take action today to provide lasting protection for your operators.
