Heat and Flame Protective Coveralls ²

Flame-Retardant Coverall Heat and Flames: certified protection for your teams

Choosing a flame-retardant coverall, also called a flame-retardant suit, directly affects the wearer's safety — never merely a matter of equipment comfort. The right model depends on the actual risk at your workstation: convective heat in foundries, radiant heat during welding, or molten metal splashes during casting. The Cepovett Safety brand covers every protection level in accordance with EN ISO 11612 and EN ISO 11611 standards, with class 2 certified garments. Personalised advice and a professional quote are available at any time to validate the match between your trade and the required protection level.

1. Which flame-retardant coverall to choose based on your risk exposure
2. Cepovett Safety Heat and Flames coveralls, designed to last
3. Compliance with EN ISO 11612 and EN ISO 11611 standards, a certified safety guarantee
4. Ordering your flame-retardant coverall: sizes, lead times and professional support

Which flame-retardant coverall to choose based on your risk exposure

Before comparing models, qualify your actual need. An undersized coverall exposes the worker; an oversized coverall weighs on your budget without any safety gain. Three risk families structure the choice:

• Convective heat: prolonged proximity to hot sources, working in foundries or near industrial furnaces.
• Radiant heat: welding, metallurgy, exposure to thermal radiation without direct contact.
• Molten metal splashes: casting, forging, steelmaking operations where the fabric must repel molten droplets.

Each coverall in the collection addresses a specific risk profile. A coverall certified to EN ISO 11612 covers several performance indices, and our teams select the relevant indices according to your workstation. For welding positions, the EN ISO 11611 standard adds protection against welding spatter and associated electrical risks. If your need is specifically welding-oriented, consult our welding equipment for a complete and consistent set of equipment.

The trades concerned are clearly identified: welders, foundry workers, metallurgists, chimney builders and steelworkers. Unsure about the right level for your workstation? Ask a Cepovett Safety expert for advice before ordering — the needs assessment is carried out with you.

Cepovett Safety Heat and Flames coveralls, designed to last

The Cepovett Safety Heat and Flames collection is built on garments designed to stand the test of time, including under intensive use. Every feature addresses a real-world challenge: maintained protection, comfort during long shifts and resistance to repeated industrial washing.

Certified materials, resistant and comfortable for everyday use

The materials used in these protective coveralls are chosen for their concrete benefit, not for technical showcase. Flame-retardant treated cotton provides appreciable wearing comfort during long working shifts, while resisting ignition. Aramid-based blends deliver enhanced thermal resistance with no melting or flame spread. Antistatic fibres limit electrostatic charges in sensitive environments.

A key differentiator: each coverall retains its protective properties after intensive use and repeated washing. A non-certified garment loses its resistance over time, exposing the wearer without their awareness. Our coveralls are designed to remain compliant wash after wash — a lasting safety guarantee for your teams.

Finishes designed for safety and on-shift comfort

The design genuinely makes usage safer. The stand-up collar and tight-fitting cuffs eliminate exposed skin areas. Back gussets preserve freedom of movement during prolonged standing shifts. Flap pockets prevent the accumulation of splashes, and the marking collar facilitates team identification.

Cepovett Safety collections cover an extended size range, from XS up to large sizes depending on stock, to equip diverse profiles without compromising on fit. You can now browse the full range of heat and flame-resistant coveralls available and compare models suited to your activity. To complete the protection, also consider the complementary thermal accessories available in our catalogue.

Compliance with EN ISO 11612 and EN ISO 11611 standards, a certified safety guarantee

In this sector, regulatory compliance is non-negotiable. All coveralls in the Heat and Flames collection are certified as Category III PPE, the level of control required for equipment protecting against fatal or irreversible risks. This is the first benchmark to check before any purchase.

Concretely, the EN ISO 11612 standard guarantees to the buyer that the fabric does not ignite, does not melt, does not spread flame and limits heat transmission to the skin. For welding positions, the EN ISO 11611 standard adds a class marking according to the intensity of spatter. You can explore the requirements of the standard EN ISO 11612 before finalising your choice.

Documentary traceability is a decisive asset for professional buyers and HSE managers: EU declaration of conformity and technical datasheet available for each reference. The normative choice is never made at random. A Cepovett Safety advisor validates with you the match between the workstation and the protection level before the order. Request this validation whenever your needs justify it.

Good to know : Every coverall in the collection comes with its EU declaration of conformity and technical datasheet. These documents secure your HSE file and prove equipment compliance in the event of an inspection.

Ordering your flame-retardant coverall: sizes, lead times and professional support

The final step should be straightforward. The collection is available in an extended size range, enabling complete teams to be equipped without shortages or compromises on fit. Every wearer finds the cut that guarantees both protection and comfort.

Tip : For a team order, group your needs by workstation and risk exposure before confirming. A consistent size mix avoids mistakes and speeds up equipping your staff.

For B2B buyers (companies, local authorities, industrial subcontractors), delivery lead times are reliable and logistics meet stated commitments — a point regularly praised by our professional clients. In the event of a sizing error, returns are accepted with a refund; you can then reorder in the correct size.

Finally, a Cepovett Safety advisor supports you with specific needs: custom marking, company embroidery or size mix for a whole team. Discover our Bespoke 360 package and get support tailored to your volume.

Are your teams exposed to other risks? Expand protection by consulting our related multi-risk clothing, complementary to the Heat and Flames collection. To equip your welders from head to toe, our dedicated protection collection is just an order away. Place your order for your EN ISO 11612 certified flame-retardant coverall today, or request your quote: guaranteed quality, certified EN standard compliance and fast delivery are with you every step of the way.